Skip to content

Gas Fitter Edgeworth

Edgeworth Plumbing Co does gas fitting across Edgeworth and the streets beside it: cooktop and oven installs, heater connections, BBQ points, gas line repairs and leak detection, all carried out by licensed plumbers and gas fitters. You hear the figure before the work begins, and every job is tested and certified before we leave.

Licensed plumbers and gas fitters · NSW Lic. 359278C

Last updated September 2026

Plumber working on a gas oven connection

What a Gas Fitter Actually Does

Gas work covers more than most households expect, and it all sits on the one licence. Sorted by where it happens in the house:

Kitchen

Cooktops, wall ovens and upright stoves, piped in and signed off

Lounge and patio

Heater outlets, indoors or under a roof

Backyard

A fixed barbecue outlet so the bottle goes, and pool heating

Side wall or laundry

Gas hot water installs, storage or continuous-flow

Under the floor

Pressure tests and repairs on older pipe

Wherever a smell turns up

Leak tracing and repair

If a job touches a gas line, it is licensed work. That includes the plumbing behind the appliance, not just bolting the appliance in.

Edgeworth Gas Fitting Services

Gas Appliance Installation

Anything that burns gas, from a wall oven to a pool heater, hooked to a line that has passed its pressure test and certified on completion. Gas appliance installation runs through the detail.

Gas Leak Detection and Repair

A gas smell, a hissing line or an unexplained bill spike gets traced with gas detectors, isolated and repaired, with the line proven sound before anything runs again. The gas leak page covers what to do in the first five minutes.

Freestanding gas cooker connected in a kitchen

How Is Gas Work Priced?

The figure moves with:

  • Metres of new pipe between the meter and the outlet
  • What the existing line is made of and what shape it is in
  • The load, since one heater outlet asks far less of the supply than a pool heater plus a cooktop
  • Access, as lines under a deck or through a slab take longer to reach

Nothing gets started until you have heard the figure and given the go-ahead.

Plumber beside a newly installed continuous-flow gas hot water unit

How Do You Know a Line Is Ageing?

The housing here shapes the gas work

At the last census, 88.4 per cent of Edgeworth dwellings were separate houses, and most of those are the brick-veneer builds of the sixties and seventies. Gas lines laid in those years are now decades old, and fittings that were new when the family moved in do not seal the way they used to.

Bigger households push the load

At the last census, households here averaged 2.4 people, and the four-plus-bedroom homes on the larger blocks often carry a cooktop, a heater and a continuous-flow hot water unit off the one supply. Every appliance added to an ageing line gets a pressure test first, because the new connection is only as good as the pipe behind it.

The reactive clay plays a part too

The soil under these streets expands through a wet season and contracts through a dry one, and that ground movement works on buried pipe joints over the years. It is one reason a gas check before an appliance swap costs less than a repair after a fitting lets go.

How Gas Work Gets Booked

1. Ring or send the form

Call (02) 4063 3469 or use the form to explain the fault. We ask enough to bring the right equipment the first time.

2. A fixed price first

A plumber inspects the job and names a fixed figure up front. Nothing gets started until you give the go-ahead.

3. Test the line, then connect

The gas line is pressure tested, the appliance connected or the leak repaired, and every joint checked with the gas detectors before certification.

4. Covered for a year

Every job carries our 365-day warranty on all work. If something we did isn't right, ring the same number.

When we're not the right call

the pipe from the street main up to your meter belongs to the gas network, so a fault on that stretch goes to their emergency crews, not to us. An oven with a dead ignition pack is electrician territory, and you get our diagnosis to pass across.
Gas fitter at work on a kitchen oven

What Customers Say

We had an urgent gas problem that required immediate attention at our home…on a Friday afternoon. … Identified the issue, fixed and tested
Lee

Gas Fitting Questions From Edgeworth Homes

Is a cooktop swap a job for a licensed gas fitter?

Yes. Any work on a gas line, from a cooktop swap to a new bayonet point, is licensed gas fitting work, not a handyman job. The line has to be pressure tested and certified once the appliance is connected, and that certification only comes from a licensed gas fitter.

Can you connect a BBQ to the house gas line?

We can. A fixed BBQ point off the house line does away with bottle swaps, and the run is sized and tested the same as any other gas work. The quote covers the pipe run, the point and the certification.

How often should a gas line be checked in an older Edgeworth home?

There is no set schedule, but if your home still runs original gas piping from the sixties and seventies builds, a check before adding any new appliance is worth it. Ageing pipe and fittings are tested under pressure before we connect anything new to them.

Is gas leak repair covered by the warranty?

It is. The repair is proven sound with a pressure test before we pack up, and it carries the same 365-day warranty on all work as any other job we do.

Need a plumber? Call or send the form

Call (02) 4063 3469 or send the form below. Available 24/7, you see a fixed figure ahead of any work, and every job carries our 365-day warranty on all work.

Call (02) 4063 3469

Request a callback

Leave a name and number and a plumber will ring you back.

We use your details only to call you back about this job. See our privacy policy.

Call (02) 4063 3469 Get a quote